Show room
Single Sided Edgebanders
HOMAG PROFI KFL 350/11/A3/WZ14
Code007953
AvailabilityImmediate
ConditionUsed
View the complete line
Cannot be purchased separately
General information
TypeSingle Sided Edgebanders
BrandHOMAG
ModelPROFI KFL 350/11/A3/WZ14
Year2013
AvailabilityImmediate
LocationIn stock
CountryItaly
Code007953
Technical information
Type of edgingThin edge, Thick edge
Gluing SystemEVA Hotmelt
Premilling Unityes
Corner Rounding Unityes
Grooving Unityes
Max feed speed32 m/min
Maximum panel thickness from60 mm
Operating Units11 nr
Min. panel height8 mm
Max. panel height60 mm
Min. panel length120 mm
Max. panel length2500 mm
Min. panel width200 mm
Max. panel width1200 mm
Min. edge thickness0.3 mm
Max. edge thickness3 mm
Max. forward feed speed32 m/min
Top pressureyes
Pressure withrubber belt
Panel support guidesyes
with positioning by NCyes
Infeed panel alignment systemyes
Infeed panel alignment systemTBL 100/25/25/F
Number of groups4
1 - miller hogger
automatic timed interventionyes
2 - double chipper, top and bottom
motor power6.6 - 6.6 KW
r.p.m.5870 - 7080 RPM
3 - pre-milling unit
automatic timed interventionyes
with positioning by NCyes
motor power4 KW
r.p.m.8640 RPM
4 - pre-milling unit
automatic timed interventionyes
motor power2.6 - 3.5 KW
r.p.m.8540 - 11550 RPM
Edge coil magazineyes
no. positions24
Gluing systemyes
glue pot for EVA hot melt glueyes
premelter for EVA hot melt glueyes
Roller set to press the edgeyes
no. pressure roller5
with positioning by NCyes
Number of groups8
1 - end trimming
Constructor modelHL 84
no. motors2
automatic timed interventionyes
Max. machining speed35 m/min
number of headers2 n.
number of finishing motors2 n.
motor power0.22 KW
r.p.m.12000 RPM
2 - top and bottom rough trimming
no. motors2
Max. machining speed35 m/min
number of finishing motors2 n.
motor power0.55 KW
r.p.m.12000 RPM
3 - Corner rounding
Constructor modelFF32
no. motors4
with positioning by NCyes
Max. machining speed25 m/min
motor power0.4 KW
r.p.m.12000 RPM
4 - milling hogging
Constructor modelUF 11
no. motors1
with positioning by NCyes
automatic timed interventionyes
motor power4.0 - 5.0 KW
r.p.m.8630 - 11600 RPM
5 - edge scraping
Constructor modelPN 21
with positioning by NCyes
6 - glue scraping
7 - buffing
no. motors2
8 - air heating
no. motors2
Spray unityes
Control systemPC 22
Optional softwareWOODSCOUT
Safety standard CE markyes
Total installed power65 KW
Part of the production line:
Related machinery and accessories:
Discover FerWood

FerWood Solutions
From the machine available in its current condition to full reconditioning, through to the development of dedicated technological solutions: FerWood offers various paths to meet the production, technical and investment needs of every company.

Sell to FerWood
Turn your used machinery into a new opportunity. FerWood assesses its technical and commercial potential and identifies the most suitable sales path, through direct purchase or its own international network.



















