View the complete line
Cannot be purchased separately
General information
TypeSingle Sided Edgebanders
BrandIMA
ModelCOMBIMA/I/R75/2050
Year2013
Code006616
Technical information
Type of edgingThin edge, Thick edge
Gluing SystemEVA Hotmelt
Corner Rounding Unityes
Grooving Unityes
Max feed speed25 m/min
Maximum panel thickness from60 mm
Operating Units20 nr
Min. panel height16 mm
Max. panel height60 mm
Min. panel length250 mm
Max. panel length3000 mm
Min. panel width170 mm
Max. panel width1300 mm
Min. edge thickness0.3 mm
Max. edge thickness3 mm
Max. forward feed speed25 m/min
Top pressureyes
Pressure withrubber belt
Panel support guidesyes
Infeed panel alignment systemyes
Number of groups3
1 - miller hogger
Constructor model75.34
with positioning by NCyes
motor power8 KW
r.p.m.6000 RPM
2 - miller hogger
Constructor model75.34
with positioning by NCyes
motor power8 KW
r.p.m.6000 RPM
3 - miller hogger
Constructor model75.34
with positioning by NCyes
motor power8 KW
r.p.m.6000 RPM
Lamps to preheat the side of the panelyes
Edge coil magazineyes
no. positions6
Gluing systemyes
glue pot for EVA hot melt glueyes
premelter for EVA hot melt glueyes
Roller set to press the edgeyes
no. pressure roller7
with positioning by NCyes
Number of groups19
1 - end trimming
Constructor model08.42
no. motors2
motor power0.5 KW
r.p.m.12000 RPM
2 - top and bottom rough trimming
Constructor model08.055
no. motors2
motor power1 KW
r.p.m.12000 RPM
3 - fine trimming to trim and round
Constructor model08.0587
no. motors2
with positioning by NCyes
motor power1 KW
r.p.m.12000 RPM
4 - fine trimming to trim and round
Constructor model08.0587
no. motors2
with positioning by NCyes
motor power1 KW
r.p.m.12000 RPM
5 - Corner rounding
Constructor modelKFA x20
no. motors1
with positioning by NCyes
Max. machining speed20 m/min
motor power0.5 KW
r.p.m.18000 RPM
6 - edge scraping
Constructor model08.516
with positioning by NCyes
7 - glue scraping
Constructor model08.521
8 - buffing
Constructor model08.617-4
no. motors4
motor power0.180 KW
r.p.m.1400 RPM
9 - milling hogging
Constructor model75.34
no. motors1
with positioning by NCyes
motor power8 KW
r.p.m.6000 RPM
10 - milling hogging
Constructor model75.34
no. motors1
with positioning by NCyes
motor power8 KW
r.p.m.6000 RPM
11 - milling hogging
Constructor model75.34
no. motors1
with positioning by NCyes
motor power8 KW
r.p.m.6000 RPM
12 - milling hogging
Constructor model75.34
no. motors1
with positioning by NCyes
motor power8 KW
r.p.m.6000 RPM
13 - milling hogging
no. motors1
14 - belt sanding
Constructor model08.062
no. motors1
motor power1.8 KW
r.p.m.3000 RPM
15 - belt sanding
Constructor model08.062
no. motors1
motor power1.8 KW
r.p.m.3000 RPM
16 - belt sanding
Constructor model08.062
no. motors1
motor power1.8 KW
r.p.m.3000 RPM
17 - belt sanding
no. motors1
18 - belt sanding
no. motors1
19 - belt sanding
no. motors1
Spray unityes
Control systemICOS OPEN
Part of the production line:
Related machinery and accessories:
Discover FerWood

FerWood Solutions
From the machine available in its current condition to full reconditioning, through to the development of dedicated technological solutions: FerWood offers various paths to meet the production, technical and investment needs of every company.

Sell to FerWood
Turn your used machinery into a new opportunity. FerWood assesses its technical and commercial potential and identifies the most suitable sales path, through direct purchase or its own international network.



















