Single Sided Edgebanders
STEFANI EVOLUTION SB ONE
Code005601
AvailabilityImmediate
ConditionUsed
View the complete line
Price on request
General information
TypeSingle Sided Edgebanders
BrandSTEFANI
ModelEVOLUTION SB ONE
Year2011
AvailabilityImmediate
LocationIn stock
CountryItaly
Code005601
Technical information
Type of edgingThin edge, Thick edge
Gluing SystemEVA Hotmelt, PUR
Premilling Unityes
Corner Rounding Unityes
Grooving Unityes
Max feed speed40 m/min
Maximum panel thickness from60 mm
Operating Units15 nr
SubfamilySoftforming
Min. panel height10 mm
Max. panel height60 mm
Min. edge thickness0.3 mm
Max. edge thickness3 mm
Max. forward feed speed40 m/min
Top pressureyes
Pressure withrubber belt
Infeed panel alignment systemyes
Number of groups3
1 - miller hogger
Constructor modelAS3
automatic timed interventionyes
motor power4 KW
r.p.m.6000 RPM
2 - double chipper, top and bottom
Constructor modelDT3
motor power5.6 KW
r.p.m.6000 RPM
3 - pre-milling unit
Constructor modelCOMBI
automatic timed interventionyes
motor power4 KW
r.p.m.6000 RPM
Lamps to preheat the side of the panelyes
Edge coil magazineyes
no. positions6
Gluing systemyes
glue pot for EVA hot melt glueyes
glue pot for PUR glueyes
premelter for EVA hot melt glueyes
premelter for PUR glueyes
premelter for PUR glueNordson MC series 12
Roller set to press the edgeyes
no. pressure roller8
with positioning by NCyes
Roller set to press the edge on softformed profilesyes
with positioning by NCyes
Number of groups11
1 - end trimming
Constructor modelYU/SP
no. motors2
with positioning by NCyes
motor power0.55 KW
r.p.m.12000 RPM
2 - top and bottom rough trimming
Constructor modelR
no. motors1
motor power1 KW
r.p.m.18000 RPM
3 - fine trimming to trim and round
Constructor modelRSU 2P PN
no. motors2
with positioning by NCyes
motor power1 KW
r.p.m.12000 RPM
4 - Corner rounding
Constructor modelC1C2 2P
no. motors4
motor power0.35 KW
r.p.m.12000 RPM
5 - milling hogging
Constructor modelU-03
no. motors1
motor power5.5 KW
r.p.m.12000 RPM
6 - edge scraping
Constructor modelRCS
7 - edge scraping
Constructor modelRCS
8 - belt sanding
no. motors1
9 - buffing
no. motors1
motor power0.29 KW
r.p.m.1800 RPM
10 - buffing
motor power0.29 KW
r.p.m.1800 RPM
11 - buffing
no. motors2
motor power0.3 KW
r.p.m.1500 RPM
Spray unityes
Units fitted on overtablesyes
Control systemTSIN
Total installed power65 KW
Part of the production line:
Related machinery and accessories:
Discover FerWood

FerWood Solutions
From the machine available in its current condition to full reconditioning, through to the development of dedicated technological solutions: FerWood offers various paths to meet the production, technical and investment needs of every company.

Sell to FerWood
Turn your used machinery into a new opportunity. FerWood assesses its technical and commercial potential and identifies the most suitable sales path, through direct purchase or its own international network.



















