Beam Panel Saws: Useful Tips for Routine Maintenance
What are the main tips for the routine maintenance of the beam panel saw?
In order to ensure the perfect operation of the machinery over the long term, it is essential to carry out daily cleaning and various routine maintenance activities. To this end, our specialized technician Vali has identified the main activities that need to be carried out.
1. Clean the machine base where the blade carriage runs, once a week.
2. Clean the mechanical parts of the machine, paying particular attention to moving parts such as the pusher and the blade carriage. This step must be carried out once a week.
3. Lubricate the movement axes of the pusher and the blade carriage, approximately once a month.
4. Vacuum the electrical parts of the machine, in particular the electrical panel. This operation must be carried out approximately every 2 months.
5. Check the wear condition of the cutting blade and scoring blade belts. This check must be carried out approximately every 3-4 months.
6. Frequently remove the residues present in the chip channel. There is no specific frequency for this type of activity, and the timing must be defined based on the production volumes carried out.
7. Finally, it is advisable to sharpen the machine's tools, such as the cutting blade and the scoring blade, according to usage needs.
In addition to routine maintenance activities, it is important to remember to carry out scheduled maintenance every year. To this end, Ferwood has a dedicated maintenance service for woodworking industrial machinery, carried out by competent technicians at your complete disposal. Contact us to book a preventive inspection for your machine!




















