Double Sided Squaring Machine
STEFANI - EVOLUTION SB 2-143

< Return to search results

Code:

004128

Make:

STEFANI

Model:

EVOLUTION SB 2-143

Brands:

Ferwood As It Is
Ferwood Approved

Location:

Italy

Call Ferwood 0113 286 6689

Short Description

Corner Rounding Unit yes 
Combination Squaring Edgebanding Machine First and Second Pass 
Max Panel Width 3200 mm
Max feed speed 40 m/min
Max. edge thickness 3 mm

Complete Description

Subfamily Double Sided Squaring Machine 
Subfamily 2 Softforming 
Type of edging Thin edge Thick edge 
Gluing System EVA Hotmelt 
Min. panel height 10 mm
Max. panel height 60 mm
Max. panel width 3200 mm
Min. edge thickness 0.4 mm
Max. forward feed speed 40 m/min
Conveyor Track with dogs yes 
Distance between dogs 300 mm
Top pressure yes 
Pressure with rubber belt 
Panel support guides yes 
No. Panel Sizing / Milling units Left Side
1
Unit scoring unit 
automatic timed intervention yes 
motor power 1.8 KW
r.p.m. 6000 RPM
2
Unit miller hogger 
with positioning by NC yes 
motor power 11.5 KW
r.p.m. 6000 RPM
3
Unit double chipper, top and bottom 
automatic timed intervention yes 
with positioning by NC yes 
motor power 10 KW
r.p.m. 6000 RPM
4
Unit miller hogger 
Constructor model MX80 
automatic timed intervention yes 
with positioning by NC yes 
motor power 8.5 KW
r.p.m. 6000 RPM
5
Unit miller hogger 
Constructor model MX80 
automatic timed intervention yes 
with positioning by NC yes 
motor power 8.5 KW
r.p.m. 6000 RPM
Same technical characteristics on the left side yes 
Lamps to preheat the side of the panel yes 
Edge coil magazine yes 
no. positions
Gluing system yes 
glue pot for hot melt glue yes 
premelter for hot melt glue yes 
Roller set to press the edge yes 
no. pressure roller
with positioning by NC yes 
No. Edge Processing Units
1
Processing Unit end trimming unit 
Constructor model YU/SP 
no. motors
automatic timed intervention yes 
Max. machining speed 30 m/min
motor power 0.35 KW
r.p.m. 12000 RPM
2
Processing Unit top and bottom rough trimming unit 
Constructor model
no. motors
motor power 1 KW
r.p.m. 12000 RPM
3
Processing Unit fine trimming unit to trim and round 
Constructor model RSU 
no. motors
with positioning by NC yes 
motor power 1 KW
r.p.m. 12000 RPM
4
Processing Unit Corner rounding unit 
Constructor model C1C2 
no. motors
automatic timed intervention yes 
motor power 0.35 KW
r.p.m. 12000 RPM
5
Processing Unit milling hogging unit 
Constructor model MX80 
no. motors
with positioning by NC yes 
automatic timed intervention yes 
6
Processing Unit milling hogging unit 
Constructor model MX80 
no. motors
with positioning by NC yes 
automatic timed intervention yes 
7
Processing Unit edge scraping unit 
Constructor model RCS 
8
Processing Unit glue scraping unit 
Constructor model RCA 2C 
9
Processing Unit belt sanding unit 
no. motors
Units fitted on overtables yes 
Control system WINEDGE 
Total installed power 115 KW

Your data has been saved successfully

Ok

Are you sure you want to remove this product from your wishlist?

We regret that for the moment the service is not available, try again later, thank you.

Ok